Open the FlexTally Utility application and set the station IP address for DHCP or fixed IP.
*The initial setting is DHCP.
*When connecting the station and Cerevo LiveWedge directly with a LAN cable, click DHCP. (Auto IP will be used)
– Connect to the station
Place the station and the PC using the FlexTally Utility application on the same network and plug the USB power cable into the station. Search for the station in FlexTally Utility application.
Click found IP address.
– When setting to DHCP
Click DHCP and Save.
After setting, unplug the AC adapter to reboot the station.
– When setting to a fixed IP
Click fixed IP.
Input the IP address, subnet mask and default gateway, and then click save.
After setting, unplug the AC adapter to reboot the station.
*If you accidentally set an IP address that is not on the same network, the station unit will not be found. In order to delete the incorrect IP address, initialize the station unit.