Lamp Settings

DIP Switch Settings

Channel Settings

Up to 16 channels can be set by using DIP switches No.1 to 4.

Station ID Settings

Up to 7 groups can be set up by using DIP switches No.5 to 7.

*The setting to turn off all of No.5 to 7 is reserved for the system.

Connection Mode with Station

By using DIP switch No.8, the connection mode with the station can be changed.

About the Number Cover Frame

You can label the number of each Lamp from 0 to 9 by attaching the number cover frame to the front of each Lamp. The center part can be can cut to form numbers 0 to 9.

Number Cover Frame When the frame is attached to a Lamp.
number_cover1 number_cover2

*Please be careful to only cut the middle part of the number cover frame and not the square part on both sides.

Brightness Settings

By pressing the FUNCTION button you can set the brightness in 4 steps.